Question What can i do to cool my case(NZXT h200i-Mini ITX) and gpu(Gigabyte RTX 2080ti Windforce)?

  • String starter recoacar
  • Offse go steady
  • #1
What is the best cooling solution to neutralize mini ITX cases? I get pleasing fps and the pc is good during gambling but my gpu temp is going around 80-81-82 celcius during gaming.
Oct 6, 2022
3
0
10
0
  • #2
I have the synoptical case, since your GPU is pulling zephyr from the psu shroud i would suggest getting a SFX(-L) psu this way your gpu can take out in overbold air.

Sent from my iPad using Tapatalk In favou

Karadjgne
Dec 26, 2012
27,099
3,187
101,140
4,856
  • #3
What exactly are you victimisation for air flow now at the intake area?
Oct 6, 2022
3
0
10
0
  • #4
Tbh i just got everything and ease construction atm, i replaced both NZXT fans for two exhausting (top/rear) Button up Silent Wings 3 120 pwm and have a Ryzen 5 3600 with a Wraith Prism cooler (i do it the look) i also have a Vega 56 GPU (will be upgraded with a new RTX/Navi if they get along out). I looked at a couple of reviews and main thing i saw was that GPU can be down of fresh transmit if you use information technology with an ATX psu instad of SFX(-L), also in many reviews i saw that front intake did non change temps because of restricted in advance side in combinaton with fans.

I am waiting happening a 2x4 mainframe cable for my psu to be delivered today to complete my build.

I will constitute notice after i had time to setup everything and i hope temps will be good.

Verstuurd vanaf mijn VOG-L29 met Tapatalk

Karadjgne
Declination 26, 2012
27,099
3,187
101,140
4,856
  • #5
Bunch of BS. The hackneyed fans are seriously good fans, easily the equilateral, if not better than the Silent Wings. Hop on them from the internal (same A if mounting an aio), it leaves plenty of distance low-level the social movement cover for the low-level insistency area created by fan draw and has no issues putting a decent amount of air into the gpu.

A couple of Noctua A14x25, iPPC 2000 series NF-F12 or similar 140mm high static pressure, calculate flow oriented fans woyld be healthier.

The only issue with the psu shroud is if you get on with an oversized gpu and don't leave sufficient airspace below it, some gpus consumption massive, long-legged heatsinks/shrouds which is peachy for lengthwise designs, in an unrestricted area, but sucks for tighter spaces or sli. In most mITX cases, blower style gpus are a bonus.

With a SFX psu, some are low enough where information technology's possible to mount a supplemental slimline fan (11mm-13mm thick vrs standard 25mm) under the shroud, a shunt fan, which helps pull out air from the lowest front uptake and electrical shunt information technology 90° straight heavenward into the gpu.

#1 Golden decree of mITX, You absolutely must think Outside the loge, because there's no elbow room Inside the boxwood for conventional thinking.

With mITX, size and dimensions are extremely vital statistics, performance is overnice but IT's a secondary consideration. It's non equivalent throwing the best acting parts in a full tower and then vexation about airflow and fitment, with mITX you programme and build just about airflow and fitment first. If that means for a RTX2080 superior you go with an Evga blower, not the Asus ROG axial that's got higher performance on composition, then you get along with the blower.

geofelt
Oct 9, 2006
48,816
2,240
135,940
10,132
  • #6
Love those ITX builds.
The NZXT 200I looks to me to be a very sound option.
Specs say you have way for two front 140mm intakes.
Larger fans move many air restfully.
That is sufficient to provide fresh air for whatever you set up inside.
Noctua makes some very good ones. They come in up to 3000 rev.
You can always slow down a fan for reduced noise, but you can't hotfoot up a slow fan.
Noctua supplies a couple of low noise adapters.
United of the supplied 120mm fans at the rear will direct flow of air.

80c. is a normal target temperature for a nontextual matter tease to operate at goop potential.
What card do you have?
What is your processor and cooler?
As to the best cooler, I might suggest the noctua N-D15s.

Karadjgne
Dec 26, 2012
27,099
3,187
101,140
4,856
  • #7
I'm guessing that nzxt has stopped production on several of the H 00i series and replaced them with updated H 10i serial publication cases atomic number 3 there's zero longer any website for those. (rather messed au fait nzxt separate) so determination stats corresponding central processing unit clearance is left to reviews (and ppl still wear't merely rarely let in that (why???)). Simply if the exterior of the guinea pig has non changed, nor motherboard tray dimensions, then you should still Be able-bodied to mount cpu coolers upto 165mm (good thought that extra 5mm) which would appropriate the NH-D15S without issuing. A 240/280mm aio will also work in rive config, as shown on the H210i web page.
geofelt
October 9, 2006
48,816
2,240
135,940
10,132
Karadjgne
Dec 26, 2012
27,099
3,187
101,140
4,856
  • #9
Oh, 90% of the specs aren't an matter. What almost always gets left out is cpu cooler height. Even happening newegg. They copy/paste website specs.
Oct 6, 2022
3
0
10
0
  • #10
Bunch of SB. The farm animal fans are seriously good fans, easily the equal, if not better than the Silent Wings. Mount them from the inside (same as if climb an aio), it leaves plenty of blank space under the front cover version for the forward pressure surface area created by fan draw and has no more issues putting a decent amount of air into the gpu.

A duet of Noctua A14x25, iPPC 2000 series NF-F12 or similar 140mm heights static pressure, direct flow oriented fans woyld be better.

The only issue with the psu shroud is if you go with an oversized gpu and don't leave sufficient airspace beneath it, some gpus utilise massive, tall heatsinks/shrouds which is great for lengthwise designs, in an discretionary area, but sucks for tighter spaces or sli. In most mITX cases, blower style gpus are a bonus.

With a SFX psu, some are breakable enough where it's affirmable to mount a supplemental slimline fan (11mm-13mm thick vrs standard 25mm) under the shroud, a electrical shunt buff, which helps pull melodic phrase from the lowest foremost intake and shunt information technology 90° even heavenward into the gpu.

#1 Golden convention of mITX, You absolutely must recollect Outside the loge, because there's no room Internal the box for conventional thought process.

With mITX, size and dimensions are extremely animated statistics, execution is overnice but it's a secondary consideration. It's not like throwing the best performing parts in a full tower and then worry about airflow and fitment, with mITX you plan and establish approximately airflow and fitment first. If that means for a RTX2080 super you go with an Evga electric fan, not the Asus ROG axial that's got higher performance on paper, then you go with the blower.

Kinda fantastical bs since i never said the NZXT fans are bad???, i just went with the Silent Wings since i had them in a preceding build and i similar the way i don't hear them in the least, i did not compare them so i don't know how their sound OR operation is yet, they will constitute used as supererogatory. And so dont assume i said something which i did non.

Anyhow i accomplished my build and i have to say my Vega 56 is almost sticking to the psu shroud (or basement) in the H200, i could imagine a 2080ti choking without publicize, like i same it is not a bad idea to perish with a SFX psu it will leave room for broadcast to pass over through from underneath. When playing The Part 2 yesterday my GPU was at around 72c which is ok for a Lope Felix de Vega Carpio 56 which is hot on its own. If changing psu alone is not sufficient get a slimline fan as was recommended it testament improve airflow to your GPU.

I don't know how Nvidia GPU's are but is a slight undervolt + optimise fan curve of gpu also a possibility to lower temps a trifle?

Verstuurd vanaf mijn VOG-L29 met Tapatalk

Karadjgne
Dec 26, 2012
27,099
3,187
101,140
4,856
  • #11
I wasn't referring to the choice of fans, but the reviews on case flow of air you bet the gpu can ladder out of invigorating air. So I apologize if IT came off wrong.

Yes, closed front cases can and do impede airflow, but not to the extent many reviewers claim. And most only use just the stock fans while examination/reviewing and don't add additional fans. The problem isn't much in the case design usually, it's in the approach. It's mITX, you tin can't build in it and treat it like a miniature version of ATX, it won't work that way. You give to treat it Eastern Samoa mITX, which is assorted. Airflow is a priority, non a secondary consideration. If the case was open look, it'd silence be even as eventful only with just the 2 sprout fans, eve open front flow of air ISN't good in many cases.

My of import personal computer is a fractal design R5. It sits inside a cubby in the desk, has 1" of space on to each one side, 3" butt and 4" of clearance above. Uses 4x 140mm fans summate. 2 input, 2exhaust. My i7 at 4.9GHz got 55°C gaming, my gpu @ 124%OC stays in mid 60's. With the threshold nonopening. Reasonable requisite squealing atmospherics pressure fans as intakes.

Your Inexplicit Wings are great fans, very quiet and do a decent job, but are neither high cfm nor high sp, that was the cost of the silence. They'll work on great as eat fans, but seriously lack for performance in mITX as intakes.

That instance needs high sp 140mm fans up head-on and mounting from the inside gives enough headway between the fan and cover to permit for meliorate draw. Mounting from the front/outside takes away 25mm of airspace in front of the fan, effectively choking it.

Same applies to the gpu when using the shroud. The need to pull up stakes equally much quad A possible betwixt the fans and shroud for air. A single slot card would cost perfect, but is impractical for gaming, so a threefold slot posting is needed. But numerous dual slot card game take up 3 slots with their fancy looking fan shrouds, becoming wild-eyed for mITX habituate.

With mITX, IT's what can I healthy inside to get some performance. With ATX information technology's what performance tin I mystify with what I fit at heart. 2 totally different approaches to the build.

Tom turkey's has a phallus gallery, Tom's Members Veranda , and I'd make love to see about pics of the build with comments on any build issues you may bear run into. MITX isn't rich, IT's tiny, so when it kit and caboodle dead, it's great.

Thread starter Siamese togs Assembly Replies Date
abkkba Question Gigabyte Waterforce x360 - displaying graceful temp and vrm Cooling 0
Shalou Question Gigabyte G-Power Cardinal Pro ice chest. Cooling 0
Physixity Question will the cooler master ml240l argb work with the gigabyte z690 play x ddr4 mobo? Cooling 1
U Head How to select suitable sizing Air Ice chest for Gigabyte C200G and MSI B450 Hatchet Megabyte. Cooling 4
R Question arrangement winnow spinning slower Temperature reduction 2
Q Motion How to tie Raidmax NV-R120FB coolers to G B450M DS3H ? Cooling 2
t4z707 Question I lost control of my left laptop fan, any help? Cooling 3
H Question G Waterforce X360 to buy? Cooling 2
steph34 Enquiry gigabyte gaming oc 3080 wb looks megascopic inside Cooling 4
X [SOLVED] Testament a Asus TUF Gambling LC 240 tantrum on a gigabyte z590 gaming x mobo? Cooling 1
  • Advertising
  • Cookies Policies
  • Privacy
  • Term & Conditions
  • Topics

How Do I Connect the Fans in the Nzxt H200

Source: https://forums.tomshardware.com/threads/what-can-i-do-to-cool-my-case-nzxt-h200i-mini-itx-and-gpu-gigabyte-rtx-2080ti-windforce.3500479/